Filter System

Product Details:

JAGTAP Automatic Back-flushing Filter is a new generation self-cleaning filtration system independently designed by JAGTAP, tis integrated with a number of V Wire Filter elements.When the filter elements are clogged,a specially designed back-flushing arm will clean the elements one by one. As the high-end self­ cleaning filter,it is especially designed for customers who take good quality and high eliabity into consideration firstly.
The JAGTAP filter consists of world-class top quality crucial parts,such as filter element, gear, motor,controlsystem,etc..
Compared with ordinary mesh type self-cleaning fiter, JAGTAP Automatic Back-flushing Fliter has unparallel advantages.It has rigid and durable V-SLOT filter element, highly uniform slot width,large filter area insingle filter,super highflowrate up to 3000m3/h on single filter, fine fitration at low surfaceflow velocity,highreiability. It apples to the filtration of dirty water containing oilsludge type impurities, soft and viscous impurities, highcontent impurities, small amount of hairs and fibers.JAGTAP Automatic Backflushing Filter,which filtration rating ranges from 50-2000 micron and its ine sizeis available from 2" to 24". JAGTAP Flter as the large ftlter area filter, applies to high flowrate filtration or high precision fitration; as the small fiter area filter. applies to low flowrate filtration or rough grade filtration; are specially designed for super high flowrate at rough ratings.JAGTAP Automatic Back-flushing Fiter can remove the solid particles from various water resouce and low viscosityliquid (e.g.machining coolant ). It makes the fluid meet cleanness requirement and protects downstream key equipments from clogging,abasing and fouling. ItIncreases the key equipment running efficiency and service life.JAGTAP Filter automatically works continuously on-line and reduces the downtime cost,ma intena nce cost and labor cost. JAGTAP Automatic Back-flushing Fiiter is the advanced solution for the self-cleaning filtrationof water and low viscous liquids.

Applicable Typical Industries and liquids
Applicable industries:
Water treatment, steel, pulp and paper, mining, petro-chemical, municipal, irrigation etc.
Typical Applicable in liquids:
Groundwater, seawater lake, reservoir water, pond water, Cooling water circulation, bearing Cooling water, Oilwells note water,process of circulating water, cleaning agents,cleaning water,etc.

Filtration function:
Remove large particles,purifyliquids,protect critical equipment

Filtration type:
Back-flushing filter, automatic continuously online filtration

Additional Information:

• Item Code: JEW-ABF
• Delivery Time: 8 Weeks

Product Details:

We JAGTAP Engineering Works are the manufactuere and exporter of V Wire Filter Screen for Rainwater Harvesting. JAGTAP V Wire Screen Filter is a Highly Acceptable Modern Technology in Rain Water Harvesting. 

Salient features & benefits of V Wire Rainwater Harvesting Filter Screen
V Wire filter screen
 Anti-corrosive material :Made from Stainless Steel and Suitable for acid treatment to remove incrustation, chocking of gravels which ensures long life of bore well.
 Vee shaped Slots :Produces jetting effect to inject recharge water into the aquifer.
 More than 1 times effective open area :Compared to any slotted pipes) gives maximum recharge rate at minimum frictional head loss which also reduces incrustation rate.
 Efficient and non-clogging screen assembly :Effectively filters out maximum suspended solids from raw water with non-clogging slots for sustained recharge rate.
 Easy installation :Saves money, time and energy. Customized for small or very large roof top area.
 Continuous slots gives large % open area.

Product Details:

JAGTAP Miscella filter

JAGTAP Miscella Filters are used for filtering solid contaminants from Vegetable oil and Solvent mixtures.

JAGTAP Miscella filter reduces choking of downstream equipment e.g. heaters, by removing any solid particles and flakes from the oil miscella. They reduce the need for frequent cleaning of downstream equipment and the necessity of expensive plant shutdowns. The miscella with sediments is fed to the vessel continuously and sediments gets filtered in wedge wire screen and are continuously scrapped by rotating brushes fixed on a central shaft, sediments being heavy settle at the cone and are periodically sludged-out from the bottom of vessel through ball valve. 

Product Details:

Flowrate standard vessels: (Max 175m3/h per unit)
  . Filtration grades: depend on water quality ,water flowrate and filter bed type
  . Diameter stand vessels:16” - 96”
  . Design pressure: 1.0Mpa

The Filtering Process
Filtering with media filters, also known as depth filtration, is done by filtering water through a thick layer of graded particles, called the filter bed. These particles can be sand, gravel or other granular materials. The filtration degree depends on the effective size of the bedding and the water velocity through the filter.
Raw water enters from the filter inlet (1) and percolates through the filter bed (2). Suspended materials come into contact and attach to the media particles. Clean water flows through the JAGTAP Wedge Wire Nozzles (3) and out of the filter via the outlet valve (4).
The gradual dirt buildup in the filter bed causes an increase in the pressure differential across the filter and when it reaches its maximum design value, a cleaning process should be performed. In automatic media filter installations a pressure differential switch senses the pressure differential and when it reaches a preset value, the self cleaning process begins.
 
The Cleaning Process
Cleaning is done by backwashing; pressurized water flows in reverse direction – from the nozzles upwards, causing suspension of the filter bed, thus releasing the suspended matter from the bedding. The dirt particles are then washed out of the filter through the back-flush valve. In automatic media filters installations the cleaning process is done by the system’s controller. When the pressure differential switch senses that the differential pressure across the system reached a pre-set value, a signal is sent to the flushing controller and the self cleaning process begins.

Technical parameters

Flow(max)                         175m3/h per unitTank diameter                         16"(400mm)-96"(2400mm)Design pressure                 1.0MpaBackwash pressure(Min) 0.2MpaMedium                         quartz sand/activated carbon etcAdjustable flushing time 10-200 secondsPower supply                 220 v / 50 Hz Control modes                 Pressure difference/time/manual/PLC(optional)Shell material                 304 stainless steel/316L(optional)

Product Details:

Automatic Side Stream Quartz Sand Filter Cooling Tower

Operation: 

 

Water enters the filter via the inlet and spreads evenly onto the media.
Solids and organic materials are trapped within the media. The clean water passes through the media and flows out via the nozzles. 
The back flushing process is done by shutting the inlet of the filter and allowing the water to enter from the bottom, lifting the media and releasing the solids that exit the filter through the back flush manifold.
This process can be controlled full automatically. 

Standard Characteristics:

 

•Filter housing material of construction: Mild Steel 

•Pre-treatment: sand blasting  

•Exterior & Interior coating: Epoxy resin coating  

•Connections: Flange 

•Maximum recommended working pressure: 2.5-10 bars 

•Equipped with “mushroom” diffusers with vertical openings 

•Diffusion protection for screws, nuts & washers 

 

•Operation: fully automatic

Product Details:

JAGTAP Wedge Wire For Beer Brewing Process lauter tun screen lauter filter

 

Wedge wire For Beer Brewing Process lauter tun screen lauter filter is easy to penetrate, having good wear-resisting and corrosion resistance. With Trapezoidal cross-section, even gap, stable welding quality, large opening area, long life time, high strength and high load capacity, it can be made into various shapes. The dimensions, wire diameter, slot and frame structure can be customized.

Lauter Tun Screen, Mash Tun Screen, False Bottom Screen, Etc.

 

Diameter Range (MM): 200mm To 2500mm. Diameter Customized

 

Normal Diameter (MM): 29”, 30”, 35”, 37”, 40”, 45”, 47”, 59”, 63”, 74”, Etc

 

Normal Slot (MM): 0.7mm, 0.75mm, 0.8mm, 1.0mm, customized

Product Details:

Stainless steel wedge wire Resin Traps 
JAGTAP Resin Traps are recommend in the following situations:
1. Formations comprising small or fine particles.2. Water wells where gravel packs are to be installed.3. Thin aquifers.4. Small-diameter wells.5. Wells that need to developed.
Advantages of Stainless steel wedge wire Resin Traps for Ion Exchange Filters
1. Screens with high open area are more suitable for the construction of high-quality water wells, oil wells and gas wells.2. Low cost operation   Screens with high open area shall favor groundwater infiltration. Abundant water shall reduce the water level’s down, thus to save       energy consumption.3. Reduce the abrasion of the pump    Under the same condition, high open area can make the speed of groundwater’s entering into the screen much slower than any  other filtration apparatus, which will avoid sand’s entering into screen because of high pressure, thus reduce the abrasion of the pump.4. Extend the life span of wells   Comparatively, groundwater’s entering into screen with higher open area is much easier than the entering into lower open area screen. The slow water flow shall extend the life span of wells.
Material
SS304, SS316, SS316L, Duplex, Hastelloy, etc
OD - 25mm-2000mm
Length - Up to 6000 mm
Slot - 50 micron to 3000 micron (Tolerance:+-5 micron)

Product Details:

JAGTAP lautering tun screen is a piece of equipment used in the brewing process to filter wort, which is the liquid extracted from the mashing process of brewing beer. The screen is typically made of stainless steel and is placed at the bottom of the lautering tun, which is a vessel used to separate the liquid wort from the solid grains.
The screen allows the wort to flow through while retaining the solid grains, which are then discarded. This process is important because it separates the fermentable sugars from the grain husks and other solid materials, which can negatively impact the quality and taste of the beer if not removed.
There are various types of lautering tun screens, including false bottoms, wedge wire screens. False bottoms are flat screens that are placed at the bottom of the tun and are typically made of stainless steel.
Wedge wire screens are flat screens that are made of stainless steel and are used to filter the wort as it flows through the tun. 
The type of lautering tun screen used will depend on the specific brewing process and the desired outcome. However, all lautering tun screens serve the same purpose of separating the wort from the solid grains, which is essential for producing high-quality beer.
JAGTAP SS lauter tun screen for brewing beer wort filtration. 

Lauter Tun vessels are used in the craft beer brewing process between the mash tun and the brew kettle. The lauter tun separates the barley husks from the clear liquid wort. The barley husks provide a natural filter bed through which the wort is strained and drains out of the lauter tun as a clear liquid.
A JAGTAP Wedge Wire Screen is the preferred false bottom for lauter tun tanks in many breweries. The stainless steel wedge wire screen can be made in sections to fit through any man-way. 
We JAGTAP Engineering Works manufacture wedge wire screens for the brewery industry. Stainless steel wedge wire screens provide a false bottom in a lauter tun in many craft beer breweries. The lauter tun screen is necessary for a proper separation process. All lauter tun/mash tun screens are custom built to your specifications. These wedge wire screens can be built as one piece/screen or in sections to fit through any size manway and are designed to sit on a ledge within the tank/kettle.